使用說明 Instruction
為使陶瓷輥棒達到理想的使用效果,延長使用壽命,請您在使用陶瓷輥棒時參考以下說明:
1.新瓷輥在使用前,應放置窯頂或窯旁(60~80℃)干燥24小時以上。
2.涂有耐火材料涂層的瓷輥,應放置窯頂或窯旁干燥72小時以上。
3.更換瓷輥時,應迅速、快捷,并旋轉瓷輥。
4.從中、高溫帶取出的瓷輥,避免接觸到低冷的物品,應放置在有石棉墊層的支架上,并保持旋轉狀態至600℃以下。
5.瓷輥表面粘有小面積的釉料顆粒,會影響瓷輥的熱震性能,應定期清理。
6.不合格的原料、燃料會侵蝕輥棒,降低輥棒使用壽命,謹慎使用。
In order to guarantee the best application, and prolong the service life of the rollers, please with reference to the following specification:
1. Before being used, the new rollers should be put on the top or at sides of kiln at 60℃ to 80℃ to dry for 24 hours at least.
2. The rollers with coating should be put on the top or at sides of kiln to dry for 72 hours at least.
3. The operation replacing rollers should be done as quickly as possible, and rollers should be kept rotating during being replaced.
4. The rollers which are taken out from the highest and medium temperature zone should be put horizontally on the support with asbestos layer in order to avoid touching cold things, and be kept rotating until the temperature of the roller falls down below 600℃.
5. Glaze droplets sticking on rollers’surface which can affect the thermal shock resistance of rollers, should be cleaned regularly.
6. Unqualified raw materials and fuels will erode the rollers, please be careful to use them.