高溫氧化鋁陶瓷輥棒 High temperature alumina ceramic roller
高溫氧化鋁陶瓷輥棒屬剛玉莫來石制品，生產工藝先進，質量把控嚴格，具有高溫強度大、熱震穩定性好、耐腐蝕性強、直線度優異等特點，適用于?；u、內外墻磚、釉面磚、仿古磚等輥道窯高溫?zé)缮a(chǎn)線。
High temperature alumina ceramic roller of corundum mullite products, advanced production technology, strict quality control, has high strength, good thermal shock stability, strong corrosion resistance, excellent linearity characteristics, applicable to both inside and outside wall tiles, glazed tiles, antique bricks, such as roller kiln production line.
SF-F方梁 SF-F ceramic square beam
目前，對日用瓷、衛生瓷、電瓷、工藝瓷等的焙燒多采用隧道窯、梭式窯等高效率熱工設備。其窯車支架絕大多數選擇SiC制品，尤其是橫梁采用R-SiC材質，價格昂貴，大幅增加了使用成本。R-SiC方梁雖然高溫性能優越，但仍然難以克服該材質固有的抗氧化性差的致命弱點，表現為使用一個階段后，由于氧化造成的組織結構脆弱，使其高溫強度 迅速衰減，縮短了使用壽命。
我公司運用先進工業技術，采用進口原料，適時推出了SF-F方梁，該方梁具有優良的高溫性能和熱震穩定性，承重大，直線度、平整度好，能在任何高溫氣氛下使用，不存在氧化還原現象，壽命可達300次以上。
At present, the firing of table ware, sanitary ware, electronic ceramic and ceramic and craft ceramic mostly adopt the highly efficient thermal equipment such as tunnel kiln, shuttle kiln and so on. The supports of kiln car mostly are silicon-carbide products; especially crossbeams made of the very expensive R-SIC increase the expenses of consumption by a big margin. Although R-SIC square-beam has better high temperature properties, it is difficult for it to overcome its innate weakness of bad oxidation resistance, which can be proved form that its flexural strength at high temperature sharply reduces after used for a period of time, for the reason of that the structure becomes fragile due to oxidation. Undoubtedly, its using life is fairly short.
Our company introduces the SF-F square-beam properly, it is produced with advanced technology and imported raw materials. SF-F square-beam has good properties at high temperature, thermal shock resistance, straightness and flatness and can bear heavier load of products, it also can be used in any atmosphere at high temperature without oxidation and reduction. The life will up to 300 times.
輥道窯急冷區星形輥棒、內外花棒Special shaped rollers for fast
為增強輥道窯急冷區輥棒的抗彎能力開發生產的星形輥棒、內外花棒，在基礎不增加截面面積的情況下，間接增加了壁厚，從而有效增強了對大風壓產生的彎曲壓力的抵抗能力，且熱震性能優異，解決了該區域普 通輥棒使用過程中易彎、易裂、易斷的難題。
Special shaped rollers have been developed to increase the bending of the rollers used at the fast cooling zone of roller kiln .The wall thickness of the roller is indirectly increased with out increasing the area of the cross section. The bending strength of rollers against the heavy air pressure is effectively increased and the thermal shock resistance is excellent. It resolves the problem that the common rollers easily bend, crack and break when being used at fast cooling zone.
陶瓷輥用涂料 Coating for ceramic roller
陶瓷輥用涂料是輥道窯用陶瓷輥的專用新產品。該產品使用時涂覆在陶瓷輥表面形成厚度均勻的保護層，有效減少釉料對陶瓷輥的粘結和侵蝕。本產品施工方便且更換陶瓷輥時極易清理，可以延長陶瓷輥的使用 壽命，降低建筑陶瓷生產廠家的生產成本。
Coating for ceramic roller is one kind of new product specially used to protect ceramic roller for roller kiln. A protective layer with uniform thickness can be formed when the coating is coated on ceramic rollers surface which can effectively prevent the glazes from sticking to and eroding ceramic rollers. It is convenient to use this coating and it is easy to clean the glaze drops form rollers. Therefore, the using life of ceramic rollers can be prolonged, and the production cost of tiles plants can be reduced.
